Takagi Mobius T-M50-NG Tankless Water Heater - Natural Gas

Natural Gas Input
Min. 15,000 Btu
Max. 380,000
LPG Input
Min. 15,000 Btu
Max. 380,000
Gas Connection
1" NPT
Water Connection
1" NPT
Natural Gas Pressure Inlet
Min. 5.0" W.C.
Max. 10.5" W.C.
LP Gas Pressure Inlet
Min. 8.0" W.C.
Max. 14" W.C.
Weight
112 lbs
Dimensions
25.3" X 24.8" X 11.8"
Ignition
Electronic Ignition
Electrical Supply
AC 120V (60 Hz)
Water Pressure
Min. 15 PSI
Max. 150 PSI

Takagi Mobius TM50 Tankless Water Heater< br/> The NEW T-M50 model, also know as "The Monster" was specifically designed for heavy-duty commercial applications. The T-M50 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. The T-M50 also offers a dual-combustion system for added redundancy.
The T-M50, also know as "The Monster Tankless," is Takagi’s most powerful tankless water heater yet and was developed specifically for commercial applications. The T-M50 offers many benefits including the following: 380,000 BTU/U, up to 14.5 GPM (Max) The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit. Easy- link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi- controller unit. Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running. Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks. Offers precise control of the water valves. 8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications. 7-segment LED for error codes: Remote controller is not required to pinpoint problems. Ignition indicators: indicates which burner is fired up at the moment. Utilizes the air-fuel ratio rod for added safety. The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress. Increase in fin pitch: Fins are more "spread out" which improves the durability of the heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at the top of heat exchanger reduces condensation.